Swap With Dell 9300

  • Subscribe to our RSS feed.
  • Twitter
  • StumbleUpon
  • Reddit
  • Facebook
  • Digg

Monday, December 7, 2009

ION platform with PCI slot

Posted on 7:39 PM by Unknown
As explained in my previous blog, I needed an ION platform with a PCI slot. The slot will hold my already existing TV tuner card. I searched for a nvidia ION motherboard with a PCI slot. I could only find one in newegg. At $160 it is pretty cheap too!

Now I need a case to enclose it. I found this case. It is not the best, but will do for now. The reason for going with this case is because I wanted it to be compact and at the same time should be able to house 2 3.5" hard drives and a 5.25" blu-ray drive. The case is small at 11.80" x 8.70" x 5.1". The cost of this case is $40.

Next up, I need a couple of memory sticks. I am not planning to remove the memory sticks from my desktop PC and put them here because I want to sell the old desktop in a proper working condition. It will have everything except for the TV tuner card. I think 1 GB should be sufficient for the small HTPC especially since it will run linux. A quick search produced results with 1 GB memory sticks costing about $25.

Finally I need a 1TB hard drive. A decent western digital hard drive can be had for about $85. So that completes the HTPC. I am not planning on purchasing additional hard drive or blu-ray/DVD drive at this point simply because I don't need them yet.

The total cost of the HTPC comes to about $310. Not bad at all. With shipping and taxes it still will not be more than $350. I am not sure when I will buy it, but it is on my list of things to buy...
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Posted in | No comments
Newer Post Older Post Home

0 comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Popular Posts

  • Installing Boxee on Gentoo: my experience
    You have probably heard of Boxee and Gentoo (come on). I wanted to give Boxee a try, because of all the movies and tv shows that I can watc...
  • InduinoX: Interfacing with LCD
    After my quick Hello World app , I became a bit more adventurous and decided to interface with the LCD screen that was part of the basic ki...
  • InduinoX and wireless relays: Part I
    It has been a while since I received my wireless relay and I finally got some time this weekend to put them to good use. The connections we...
  • IR remotes
    As part of my  home automation project , I also wanted to control my home entertainment system. The controller can be a web interface or an ...
  • InduinoX: IR receiver
    From my previous post , you probably understood how IR remotes work in general. Now lets take a look at how we can read the signals coming f...
  • Attesting General Power of Attorney in SF
    Recently I had to go through the motions of getting a General Power of Attorney (GPA) document attested in San Francisco. I am an Indian by ...
  • Google Chromium (the open source chrome browser) on Gentoo!
    Chromium is not yet complete no matter what I say here. Please do not post bugs or assume this is the final version of chromium. It still la...
  • What Darwin Never Knew: DNA
    I just finished watching one of the best PBS NOVA episodes - "What Darwin Never Knew". It is exceptionally good. I was finally abl...
  • VirtualBox additions
    I got everything working from with in virtual box, except for the additions. I was able to run VBoxLinuxAdditions.run (from the Guest additi...
  • Building a linux gaming PC: Update 1
    Today I received my 1GB memory, the upgrade I require to transform my media center desktop PC into a moderately powerful gaming PC. I am sti...

Categories

  • 555 timer
  • arduino
  • delay circuit
  • electronics
  • gentoo
  • home automation
  • induinox
  • ir emitter
  • ir receiver
  • ir remote
  • kubuntu
  • lcd
  • ldr
  • leds
  • lucid lynx
  • oscilloscope
  • picoscope
  • probots
  • receiver
  • relay
  • relays
  • scope
  • sensors
  • simple labs
  • sony remote protocol
  • transmitter
  • virtualbox
  • virtualization
  • wireless relay

Blog Archive

  • ►  2011 (12)
    • ►  December (1)
    • ►  November (1)
    • ►  October (6)
    • ►  September (4)
  • ►  2010 (5)
    • ►  May (1)
    • ►  March (1)
    • ►  January (3)
  • ▼  2009 (10)
    • ▼  December (5)
      • How To: MusicMagicMixer
      • How To: DuMP3
      • Are there some good duplicate mp3 finders?
      • Boxee box?
      • ION platform with PCI slot
    • ►  November (3)
    • ►  May (1)
    • ►  April (1)
  • ►  2008 (29)
    • ►  August (1)
    • ►  June (1)
    • ►  May (4)
    • ►  April (1)
    • ►  March (1)
    • ►  February (10)
    • ►  January (11)
  • ►  2007 (7)
    • ►  May (5)
    • ►  April (1)
    • ►  March (1)
  • ►  2006 (8)
    • ►  November (1)
    • ►  October (3)
    • ►  September (2)
    • ►  August (2)
Powered by Blogger.

About Me

Unknown
View my complete profile